Toro 144-0379, Руководство по установке, Страница: 4 / 8

4. Install the rear, center baffle using 2 carriage
bolts (3/8 x 7/8 inch) and 2 locknuts (3/8 inch)
as shown in
Figure 3 .
Note:
This baffle installs between the front,
outer baffle flanges ( Figure 3 ).
Note:
Where the front, outer baffles, the rear,
outer baffles, and the rear, center baffle come
together, install 2 carriage bolts (3/8 x 7/8 inch)
and 2 locknuts (3/8 inch) as shown in
Figure 3 .
g021731
Figure 3
1. Carriage bolt (3/8 x 7/8
inch) 3. Front baffle flange
2. Rear, center baffle 4. Locknut (3/8 inch)
5. Tighten all the hardware.
6. Install the correct kicker baffle to each chamber
using 1 carriage bolt (3/8 x 7/8 inch) and 1 flange
nut (3/8 inch) as shown in
Figure 1 .
Note:
The hooked end of each kicker baffle
attaches to the slot in the chamber baffle ( Figure
4 ).
Note:
You may need to loosen the mating baffle
to allow the hooked end of the kicker baffle to
fit correctly.
g021732
Figure 4
1. Slot
2. Hooked end
4