Toro 140-5036 Скачать руководство пользователя страница 3

2

Removing the Existing
Cover

No Parts Required

Procedure

Remove the existing 5 shoulder screws, 5
Phillips-head screws, blower guard, and cover from
the blower assembly (

Figure 1

).

Note:

You can discard these parts.

g321826

Figure 1

1.

Shoulder screw

4.

Blower assembly

2.

Existing cover

5.

Blower guard

3.

Phillips-head screw

3

 

Содержание 140-5036

Страница 1: ...arts keep all guards and covers in place 2 Warning hearing protection must be worn 5 Cutting dismemberment hazard impeller disengage the PTO remove the key and wait for all moving parts to stop 3 Thrown object hazard do not operate the blower without the entire system installed and latched 6 Warning loss of traction do not operate with only counterbalance weights installed do not operate with only...

Страница 2: ...d Remove the existing cover Cover 1 Hex head bolt 1 4 x 5 8 inch 11 3 Locknut 1 4 inch 1 Install the new cover 1 Preparing the Machine No Parts Required Procedure 1 Park the machine on a level surface 2 Disengage the blade control switch 3 Engage the parking brake 4 Move the motion control levers outward to the NEUTRAL LOCK position 5 Shut off the engine and remove the key 2 ...

Страница 3: ... Remove the existing 5 shoulder screws 5 Phillips head screws blower guard and cover from the blower assembly Figure 1 Note You can discard these parts g321826 Figure 1 1 Shoulder screw 4 Blower assembly 2 Existing cover 5 Blower guard 3 Phillips head screw 3 ...

Страница 4: ...mbly 2 Using the cover as the template drill 1 hole 6 4 mm or 1 4 inch into the blower chute Figure 2 g321825 Figure 2 1 Drill a hole 6 4 mm or 1 4 inch here 3 Secure the cover to the blower assembly using the 11 hex head bolts 1 4 x 5 8 inch and 1 locknut 1 4 inch as shown in Figure 3 g322552 Figure 3 1 New cover 3 Blower assembly 2 Hex head bolt 1 4 x 5 8 inch 4 Locknut 1 4 inch 4 ...

Отзывы: