Toro 139-6655, Руководство по установке, Страница: 2 / 12

1
Raising the Mower for
Access
GrandStand Mowers Only
No Parts Required
Procedure
You can raise the front of the mower and support to
access under the machine for maintenance.
WARNING
The machine could fall onto someone and
cause serious injury or death.
• Always shut off the engine, engage the
parking brake, and remove the key before
performing any maintenance on the mower.
• Use extreme caution when the machine
is raised and supported on its back. The
blades and moving parts are exposed and
could cause injury.
• Use this position only for cleaning,
removing blades or baffles, and
maintenance.
1. Park the machine on a level surface, disengage
the PTO, and engage the parking brake.
2. Shut off the engine, remove the key, and wait
for all moving parts to stop before leaving the
operating position.
3. Remove the battery from the machine; refer to
the
Operator’s Manual .
4. Raise the mower deck to the highest position.
5. Drain the fuel from the fuel tank; refer to Draining
the Fuel Tank in the
Operator’s Manual .
6. Remove the hydraulic-tank cap and place a
piece of plastic over the opening and install the
cap.
This seals the hydraulic tank and prevents fluid
from leaking.
g009434
Figure 1
Grandstand mowers only
1. Cap 3. Hydraulic tank
2. Piece of plastic
7. With 2 people, raise the front of the mower
so that it rests on the drive tires and with the
platform in the upright position.
g009461
Figure 2
GrandStand mowers only
1. Ensure that you remove
the battery. 2. With two people, lift the
front end of the mower
(ensure the mower deck is
in the highest position)
2