manualshive.com logo in svg

Toro 139-3235, Инструкция по установке, Страница: 3 / 4

Поделиться
Скачать
Toro 139-3235 Скачать руководство пользователя страница 3

g314446

Figure 5

1.

Nut (5/16 inch)

2.

Bolt (5/16 x 3/4 inch)

3.

Install the nut on the discharge rod, where it was
originally removed (

Figure 6

).

g314450

Figure 6

4.

Tighten the fasteners.

4

Installing the Left Baffle

Parts needed for this procedure:

1

Left baffle

1

Bolt (5/16 x 3/4 inch)

3

Nut (5/16 inch)

Procedure

1.

Install the left baffle using 1 bolt (5/16 x 3/4 inch)
and 3 nuts (5/16 inch); refer to

Figure 7

and

Figure 8

.

g307325

Figure 7

1.

Bolt (5/16 x 3/4 inch)

g307326

Figure 8

1.

Bolt (5/16 x 3/4 inch)

2.

Nut (5/16 inch)

2.

Tighten all fasteners.

5

Installing the Decal and
Mulching Blades

Parts needed for this procedure:

1

Decal

3

Mulching blade

Procedure

1.

Install the decal to the mower deck in the
location shown in

Figure 9

.

3

 

Содержание 139-3235

Страница 1: ...d Procedure 1 Park the machine on a level surface 2 Disengage the PTO engage the parking brake and move the motion control levers outward to the NEUTRAL LOCK position 3 Shut off the engine and remove the key 2 Preparing the Mower Deck No Parts Required Procedure 1 Remove the mower deck from the machine refer to the Operator s Manual for the machine 2 Turn the mower deck upside down 3 Remove the ex...

Страница 2: ...e mower deck using 1 carriage bolt 5 16 x 3 4 inch and nut 5 16 inch as shown in Figure 3 g314446 Figure 3 1 Nut 5 16 inch 2 Bolt 5 16 x 3 4 inch 3 Install the nut on the discharge rod where it was originally removed Figure 1 4 Tighten all fasteners 60 Inch Decks 1 Install the right baffle using 2 nuts 5 16 inch as shown in Figure 4 Tighten the fasteners by hand g314449 Figure 4 1 Nuts 5 16 inch 2...

Страница 3: ...olt 5 16 x 3 4 inch 3 Nut 5 16 inch Procedure 1 Install the left baffle using 1 bolt 5 16 x 3 4 inch and 3 nuts 5 16 inch refer to Figure 7 and Figure 8 g307325 Figure 7 1 Bolt 5 16 x 3 4 inch g307326 Figure 8 1 Bolt 5 16 x 3 4 inch 2 Nut 5 16 inch 2 Tighten all fasteners 5 Installing the Decal and Mulching Blades Parts needed for this procedure 1 Decal 3 Mulching blade Procedure 1 Install the dec...

Страница 4: ...ss grows at different rates at different times of the year To maintain the same cutting height mow more often in early spring As the grass growth rate slows in mid summer mow less frequently If you cannot mow for an extended period first mow at a high cutting height then mow again 2 days later at a lower height setting Using a Slower Cutting Speed To improve cut quality use a slower ground speed i...

Отзывы:

Нет отзывов