Toro 137-9769, Руководство по установке

Страница: 6 / 8

8
Securing the Trimmer
Mount Bracket to the Lower
Trimmer Mount Assembly
Parts needed for this procedure:
2 Carriage bolt (1/4 x 3/4 inch)
2 Flange nut (1/4 inch)
Procedure
1. Fully lower the mower deck.
2. Secure the trimmer mount bracket assembly
to the lower trimmer mount assembly using 2
carriage bolts (1/4 x 3/4 inch) and 2 flange nuts
(1/4 inch) as shown in
Figure 8 .
Note:
Multiple mounting hole locations are
provided to adjust the mounting position of the
trimmer for clearance.
g248811
Figure 8
1. Trimmer mount bracket 3. Lower trimmer mount
assembly
2. Carriage bolt (1/4 x 3/4
inch) 4. Flange nut (1/4 inch)
9
Securing a Trimmer to the
Mount Assemblies
No Parts Required
Procedure
Insert the handle end of the trimmer into the large fist
clamp and the trimming end into the small fist clamp.
Check the fit of the trimmer for interference, and
adjust the mounting hole locations as required for
clearance to the machine.
6