Toro 134-3722, Руководство по установке

Страница: 5 / 12

3
Assembling the Brush Kit
to the Machine
Parts needed for this procedure:
2 Lower brush bracket
4 Self-tapping, flange-head screw (6 x 20 mm)
2
Capscrew (6 x 20 mm)
4 Washer (6 mm)
2 Locknut (6 mm)
Removing the Wheels
1. Remove the flange locknut (3/8 inch) that
secures the wheel to the axle, and remove the
wheel (
Figure 5 ).
g284602
Figure 5
1. Axle 3. Flange locknut (3/8 inch)
2. Wheel
2. Repeat step 1 for the wheel at the other side of
the machine.
Removing the Front Fins
1. Tip the machine onto its side with the air filter
up (
Figure 6 ).
g283871
Figure 6
2. Remove the 7 self-tapping, flange-head screws
(6 x 20 mm) that secure the front fins to the
supports of the mower deck, and remove the
front fins (
Figure 7 ).
Note:
You will not use these front fins with the
groomer brush kit.
g284601
Figure 7
1. Support (front fin—mower
deck) 3. Self-tapping, flange-head
screw (6 x 20 mm)
2. Front fins
5