Toro 133-2576, Руководство по установке

Страница: 3 / 8

Auger Bolt Pin Kit
Power Max ® Heavy Duty Snowthrower
Model No. 133-2576
Form No. 3408-329 Rev C
Installation Instructions
Installation
Loose Parts
Use the chart below to verify that all parts have been shipped.
Description Qty. Use
Bolt (5/16 x 2-1/2 inches) 2
Spacer 2
Locknut (5/16 inch) 2
Bolt (1/4 x 2 inches) 2
Locknut (1/4 inch) 2
Install the kit.
Installing the Kit
1. Shut off the engine and secure the machine from movement before you begin to work on it.
2. Replace bolts, spacers (if applicable), and locknuts as needed; refer to Figure 1 for the appropriate orientation.
g186563
Figure 1
1. Locknut (5/16 inch) 3. Bolt (5/16 x 2-1/2 inches) 5. Bolt (1/4 x 2 inches)
2. Spacer 4. Locknut (1/4 inch)
© 2016—The Toro® Company
8111 Lyndale Avenue South
Bloomington, MN 55420 Register at www.Toro.com. Original Instructions (EN)
Printed in the USA
All Rights Reserved
*3408-329* A