Toro 132-4193, Руководство по установке

Страница: 3 / 16

1
Installing the Rotary Sensor
Parts needed for this procedure:
1 Rotary sensor
1 Inner sensor bracket
1 Outer sensor bracket
2 Bolt (M4-10 mm)
2 Bolt (M8-1.25 x 20 mm)
4 Locknut (M8)
1 Cam assembly
15 Flange nut
3 Bolt (M10-1.5 x 30 mm)
1 Bolt (M10-1.5 x 35 mm)
1 Locknut (M10)
1 Nut (M10-1 mm)
2 Nut (M4-0.07 mm)
2 Flat washer
Procedure
1. Ensure that the thrust frame is in the horizontal
position.
2. Support the cam tube with an overhead crane or floor
jack before proceeding to the next step (
Figure 1 ).
Figure 1
1. Cam-tube assembly 2. Rod-loader assembly
Figure 2
1. Cam assembly
3. Disconnect the hydraulic fitting on the front side of the
cam assembly (
Figure 3 ).
g0304 85
Figure 3
4. Measure the distance between the flag and the end of
the adjustment bolts as shown in Box A of
Figure 4 .
3