Figure 45
1.
Hole—pillar A (driver’s
side)
3.
Fender
2.
Washer pump wire
harness
4.
Electrical mounting plate
3.
Route the wire harness forward, between the electrical
mounting plate and the fender to the machine (
and
4.
Route the wire harness for the washer pump inboard
toward the washer-fluid tank, and align the harness
with the 2-blade connector on the washer-pump motor
(
).
Figure 46
1.
2-socket connector
(washer pump wire
harness)
4.
Electrical mounting plate
2.
Washer pump wire
harness
5.
Fender
3.
2-blade connector (washer
pump)
6.
Front of the machine
Connecting the Wire Harness to the
Washer Pump
1.
Align the 2-socket connector of the wire harness for
the washer pump to the 2-blade connector of the
washer pump (
Figure 47
1.
2-blade connector (washer
pump)
2.
2-socket connector
(washer pump wire
harness)
2.
Push the wire-harness connector onto the pump until
the connector fully seats (
).
16
