3
Installing the Kickers
Important
Make sure the bolt heads are installed on the
inside of the cutting chamber.
1. Measure from the spindle center lines, and locate
kickers as shown in Figure 3.
2. Holding kickers tight against the cutting chamber, mark
and drill a hole for each kicker (11/32 inch dia.)
(Fig. 3).
m–6249
2
1
4
3
3
3
5
6
4
Figure 3
1.
4–1/4 inch (108 mm)
2.
3-1/2 inch (89 mm)
3.
Mark and drill holes here
(11/32 inch dia.)
4.
Center line
5.
Spindles
6.
Back of mower
3. Install each kicker with a bolt (5/16 x 1 inch) and a
locknut (5/16 inch) (Fig. 4).
.
m–6248
2
1
4
3
5
5
5
Figure 4
1.
Kicker
2.
Bolt, 5/16 x 1 inch
3.
Lock nut, 5/16
4.
Back of cutting chamber
5.
Mark and drill hole here