Toro 09749, Руководство оператора, Страница: 34 / 48

Lubrication
Greasing the Bearings and
Bushings
Service Interval: Every 50 hours
Lubricate the 18 core processor grease fittings regularly with
No. 2 lithium grease. Lubricate the chopper, rear roller and
rotating corner bearings immediately after every washing.
1. Lubricate the following grease fittings:
•
Tow frame (2); refer to Figure 39 .
•
Lift cylinder (2); refer to Figure 38 and Figure 41 .
•
Lift axle (2); refer to Figure 38 .
•
Jack shaft (2); refer to Figure 41 .
•
Chopper assembly (2) Figure 42 and Figure 40 .
•
Rotating corner (2) Figure 42 and Figure 40 .
•
Pickup brush (2) Figure 42 and Figure 40 .
•
Rear roller (2) Figure 40 .
Figure 38
Figure 39
Figure 40
Figure 41
34