7.
For the location, select the 3-
POINT
option and
select the next screen icon.
8.
Select the power source as the PTO and select
the next screen icon.
9.
Select the engagement method as S
WITCH
and
select the next screen icon.
Note:
The attachment engages when you turn
the PTO switch on.
10.
Scroll down and select R
ATE
C
ONTROL
and
select the next screen icon.
11.
Select the decel response time of L
OW
and
select the next screen icon.
12.
Set the max transport speed desired and select
the next screen icon.
13.
Set the reverse speed desired and select the
next screen icon.
14.
Set the max work speed desired and select the
next screen icon.
15.
Set the work speed adjustment span and select
the next screen icon.
16.
Set the 3-point transport position and select the
next screen icon.
17.
Set the 3-point maximum work position and
select the next screen icon.
18.
Set the 3-point minimum work position and
select the next screen icon.
19.
Set the drop speed and select the next screen
icon.
20.
Set the raise speed select the next screen icon.
21.
Set the PTO shaft speed and select the next
screen icon.
22.
Set the PTO engagement speed to S
TANDARD
from the following options and select the next
screen icon.
A.
L
OW
B.
M
EDIUM
C.
S
TANDARD
23.
Set the delay then raise time and select the next
screen icon.
24.
Set the minimum engine speed and select the
next screen icon.
25.
Enter the name of the attachment.
A.
Enter the name of the attachment by using
the arrow icons. When you move the cursor
to the letter you want, press the lower right
button to select that letter.
B.
Select the save button
.
26.
Confirm the save by selecting the save icon
.
27.
Turn the mode selector knob the attachment
position.
g250707
Figure 26
16
