Toro 07511AA, Руководство пользователя программного обеспечения

Страница: 7 / 16

g250708
Figure 11
Low Automotive Mode
Use Low Automotive Mode to drive the machine
similar to a passenger vehicle with an automatic
transmission. This mode provides the capacity for
higher payloads or steeper hill climbing speed at a
lower ground speed. Use this mode to efficiently
transport heavier payloads or trailers.
To access Low Automotive Mode, turn the
operation-mode selector to the
L position ( Figure 12 ).
g250712
Figure 12
InchMode™
If Equipped
Note:
The InchMode setting is available through
the use of an optional kit; see your authorized Toro
distributor for more information.
Use the InchMode setting to aid in the connection of
attachments to the machine. To access the InchMode
setting, turn the operation-mode selector to the
I
position ( Figure 13 ).
g250709
Figure 13
To aid in the connection of attachments, locate and
use the tethered remote to direct the machine forward
or reverse, and to lift and lower the 3-point hitch. You
can also engage the PTO.
Setup Mode
Use Setup Mode to access machine settings, service
details, and basic machine information. You can
also add or adjust the operational parameters of an
attachment.
You can also use Setup Mode to attach and configure
attachments. The engine stays at low idle when
pressing the accelerator pedal and slowly moves the
machine forward or in reverse. Pulling the PTO switch
out engages the PTO (regardless of the current PTO
parameter setting) and use the paddle to raise or
lower the 3-point hitch.
To access Setup Mode, turn the operation-mode
selector to the
S position ( Figure 14 ).
The following are possible in Setup Mode:
•
You can move the vehicle at a very low speed and
low engine rpm.
7