Toro 07324, Руководство по установке

Страница: 3 / 8

Installation
Loose Parts
Use the chart below to verify that all parts have been shipped.
Description Qty. Use
No parts required
–
Prepare the machine.
Rear support tube 1
Left, rear support bracket 1
Right, rear support bracket 1
Bolt (5/16 x 2-3/4 inches) 8
Bolt (5/16 x 2 inches) 2
Bolt (5/16 x 1-3/4 inches) 4
Flat washer (5/16 inch) 10
Flange nut (5/16 inch) 25
Bolt (5/16 x 1 inch) 10
Right dash-support bracket 1
Carriage bolt (5/16 x 3/4 inch) 2
Flat washer (3/8 inch) 2
Bolt (3/8 x 1 inch)—machines with ROPS only 2
Clinch nuts—machines with ROPS only 2
Hex-socket button head screw (5/16 x 2
inches)—2016 and after models only
1
Spacer—2016 and after models only
1
Flat washer (11/32 inch)—2016 and after
models only
1
Locknut (5/16 inch)—2016 and after models
only
1
Install the canopy.
Preparing the Machine
1. Park the machine on a level surface.
2. Engage the parking brake.
3. Shut off the engine and remove the key from the key switch.
g038494
Figure 1
3