the key clockwise to the On position to operate the machine
and accessories. After stopping the machine, rotate the key
counterclockwise to the Off position. Remove the key when
leaving the machine.
Figure 10
1.
On/Off switch
5.
Machine-status light
2.
Horn button (TC Models
only)
6.
Power-cargo-bed switch
(optional)
3.
Light switch
7.
Rear lift switch (optional)
4.
Battery/hour meter
8.
Machine-direction switch
Horn Button (TC Models only)
Press the horn button to sound the horn (Figure 10).
Battery-discharge Indicator
The battery/hour meter provides you with an indication of
how much charge is contained in the batteries (Figure 10
and Figure 14) and the number of operating hours on the
machine. The battery meter is located at the top of the LCD
screen. When the machine batteries are fully charged, ten
bars extend from the 0 to the 1 position. As the charge is
used, bars disappear starting on the right side. For detailed
information on the battery meter, refer to Understanding and
Using the Battery System (page 18).
The hour meter is located at the bottom of the LCD screen.
It logs operating hours whenever the key is in the On position
and the machine is in motion.
Machine-direction Switch
Use this switch (Figure 10) to toggle between forward and
reverse operation.
Note:
If the machine-directional switch is moved to the
Reverse position when the On/Off switch is in the On
position, a buzzer will sound to warn the operator that the
machine is set to move in the reverse direction.
Machine-status Light
The machine contains a computer that monitors the state of
the machine electrical systems. This computer communicates
the status of the machine to you through the machine-status
light. Always check this light when you turn the On/Off
switch to the On position (Figure 14) When there are no
problems and the machine is operational, the light is on.
When there is a problem, the light flashes. The light flashes
at various intervals for different problems and events. If the
light blinks, refer to Understanding and Using the Battery
System (page 18) for a description of the flash codes.
Light Switch
Use this switch to turn the headlights on and off (Figure 10).
Cargo Bed Lift Switch (Optional)
Use this switch to raise and lower the cargo bed (Figure 10).
Rear Lift Switch (Optional)
Use this switch to raise and lower the rear lift (Figure 10).
Supervisor Speed-limit Switch
The supervisor speed-limit switch, located under the cup
holder (Figure 11) has 2 positions: On and Off. Rotate the
key clockwise to the On position to limit the maximum
machine speed to a factory setting of 19 kph (12 mph). Rotate
the key counterclockwise to the Off position to restore the
maximum speed of the machine.
G009236
1
Figure 11
1.
Supervisor speed-limit switch
16
