Toro 04823, Руководство оператора

Страница: 6 / 20

Maintenance
Checking the
Reel-Driveshaft Grease
Point
Service Interval: Yearly
1. Remove the hardware that secures the reel-drive
assembly to the side plate (
Figure 5 ).
g284793
Figure 5
1. Socket-head screw 4. Spring washer
2. Spacer 5. Nut
3. Washer
2. Remove the reel-drive assembly, flat washers,
spring washers, and spacers from the side plate
(
Figure 5 ).
3. Check the inside of the reel driveshaft ( Figure 6 )
for any remaining grease.
If you do not see a sufficient amount of grease,
add more grease to the male and female spline
shaft.
g276424
Figure 6
1. Reel driveshaft
4. Use the previously removed socket-head
screws, washers, and spacers to secure the
reel-drive assembly to the side plate.
5. Install the cutting unit to the traction unit; refer to
your traction unit
Operator’s Manual .
6