Toro 04472, Руководство оператора

Страница: 2 / 8

2
All Rights Reserved
Printed in the USA
2001 by The Toro Company
8111 Lyndale Avenue South
Bloomington, MN 55420-1196
Contents
Page
Introduction 2 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Optional Equipment 2 . . . . . . . . . . . . . . . . . . . . . . . . . .
Adjustments 3 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Adjusting the Bedknife to the Reel 3 . . . . . . . . . . . .
Choosing Cutting Unit Attitude 3 . . . . . . . . . . . . . .
Leveling the Front Roller to the Reel 4 . . . . . . . . . .
Adjusting the Top Shield Height 5 . . . . . . . . . . . . .
Adjusting the Top Bar 5 . . . . . . . . . . . . . . . . . . . . .
Adjusting the Height of Cut 5 . . . . . . . . . . . . . . . . .
Operation 5 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Cutting Unit Characteristics 5 . . . . . . . . . . . . . . . . .
Daily Adjustments of Cutting Unit 6 . . . . . . . . . . . .
Maintenance 6 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Greasing the Bearings and Bushings 6 . . . . . . . . . .
Backlapping the Cutting Units 7 . . . . . . . . . . . . . . .
The Toro General Commercial Products Warranty 8 . .
Introduction
Read this manual carefully to learn how to operate and
maintain your product properly. The information in this
manual can help you and others avoid injury and product
damage. Although Toro designs and produces safe
products, you are responsible for operating the product
properly and safely.
Whenever you need service, genuine Toro parts, or
additional information, contact an Authorized Service
Dealer or Toro Customer Service and have the model and
serial numbers of your product ready. Figure 1 illustrates
the location of the model and serial numbers on the
product.
1
Figure 1
1. Location of the model and serial numbers
Write the product model and serial numbers in the space
below:
Model No.
Serial No.
This manual identifies potential hazards and has special
safety messages that help you and others avoid personal
injury and even death. Danger, Warning, and Caution are
signal words used to identify the level of hazard. However,
regardless of the hazard, be extremely careful.
Danger signals an extreme hazard that will cause serious
injury or death if you do not follow the recommended
precautions.
Warning signals a hazard that may cause serious injury or
death if you do not follow the recommended precautions.
Caution signals a hazard that may cause minor or moderate
injury if you do not follow the recommended precautions.
This manual uses two other words to highlight information.
Important calls attention to special mechanical
information and Note: emphasizes general information
worthy of special attention.
Optional Equipment
Extended Micro Cut Bedknife Part No. 104-7720
Lo Cut Bedknife Part No. 93-4264
High Cut Bedknife Part No. 94-6392
Fairway Bedknife Part No. 94-6393
5 Blade Heavy Duty Reel Part No. 98-2181
8 Blade Heavy Duty Reel Part No. 98-2182
High Height-of-Cut Kit Part No. 99-1496
Wiehle Rear Roller Model No. 04488
Rear Roller Scraper Kit Part No. 95-1600
Groomer Model No. 04485
Rear Roller Brush Kit (for use with
Groomer Model No. 04485) Model No. 04491
Rear Roller Brush Kit Model No. 04489
Front Roller Scraper/Brush Part No. 104-7731
Full Roller Assembly Part No. 104-2642
Note: Specifications and design subject to change without
notice.