9
Specifications
General Specifications
Engine
Kawasaki, 4-cycle, 3.7 (2.7 kw) air cooled OHV engine, 3600 RPM, 7.57 cu in.
(124 cc) displacement, cast iron cylinder sleeve; electronic ignition with integral
lighting coil; maximum noise suppression muffler; 83 dB(A) at operator’s ear
Fuel capacity
2.64 qt. (2.5 l); regular grade unleaded gasoline
Traction/implement drive
Integral gearbox assembly directly mounted to the engine. The traction drive
consists of a constant mesh planetary gear reduction incorporating a wet bath
band-type clutch and brake driving a Peerless differential assembly integrated into
the gearbox assembly. The implement drive is a constant mesh gear driven
countershaft with integral cone wet clutch.
Ground speed
Mowing speed: 1.3 to 3.5 MPH (2.1 to 5.6 km/h)
Transport speed: 5.3 MPH (8.5 km/h) maximum
Traction drum
Dual cast aluminum, 7.5 in. (19 cm) diameter tapered on outer 1/3 of length
Controls
Engine mounted on/off switch, recoil starter, and choke; handle mounted throttle
lever, dual function traction/reel control lever, service/parking brake lever; safety
devices include neutral interlock system, service/parking brake, enclosed
Handle
Loop style; 1 in. (2.5 cm) diameter with easy pull pin height adjustment, operator
selected
Optional Transport tires
Two quick detachable pneumatic tires; 3.00/3.25 x 6, 3.25 in. (8.25 cm) tread width;
15 psi (1.03 bars) tire pressure
Reel construction
5 in. (12.7 cm) diameter, 11 high strength, low allow steel blades, through
hardened, impact resistant
Suspension
Semi-floating cutting unit separable from drive unit pivoting around reel centerline
(pitch axis) and pivoting around bedknife centerline side to side (roll axis)
Width of cut
21 in. (53.3 cm)
Height of cut
1/16 to 19/64 in. (1.5 to 7.5 mm) with Micro–Cut bedknife
Clip frequency
11 blade (standard): .16 in. (4.1 mm)
11 blade w/clip kit: .14 or .21 in. (3.5 or 6.4 mm)
Bedknife/bedbar
Dual screw adjustment to reel; bedknife is high carbon through-hardened steel;
micro–cut bedknife standard
Grass basket
Molded polyethylene with integrated graphics highlighting overlap guidelines;
vented for high efficiency collection
Rollers
Front roller: aluminum Wiehle, 2.5 in. (6.35 cm) diameter, .20 spacing, with sealed
bearings and multi-lip seals standard
Rear roller: aluminum full roller, 2 in. (5.1 cm) diameter with sealed bearings and
multi-lip seals standard
Dry weight
250 lb. (114 kg) with aluminum Wiehle roller, kickstand and grass basket; without
transport tires and groomer
