Toro 04030, Руководство оператора

Страница: 15 / 40

Open. Move lever to closed position when storing
or transporting machine. Open valve before starting
engine.
Recoil Starter
Pull recoil starter handle (Figure 15) to start engine.
Figure 15
1. Recoil starter 2. Hour meter
Hour Meter
The hour meter (Figure 15) located on rear of engine,
indicates the total hours of machine operation.
Kickstand
The kickstand (Figure 16) is mounted to rear of machine
and is used to raise rear of machine for installation or
removal of transport wheels.
Figure 16
1. Kick stand
Specifications
Flex 21 Flex 18
Width 35-1/2 inches (90.1
cm) 32 inches (81.3 cm)
Height
41–1/4 inches
(104.8 cm) 41–1/2 inches
(105.4 cm)
Length with basket 61–1/2 inches
(156.2 cm) 61 inches (155 cm)
Weight with full
fluids and basket
267lb (121 kg) 261lb (118 kg)
Dry weight with
basket
256lb (116 kg) 250lb (113 kg)
Engine Kawasaki, 4-cycle,
3.7 (2.7 kw) air
cooled OHV
engine, 3600
RPM, 7.57 cu
inch (124 cc)
displacement, cast
iron cylinder sleeve;
electronic ignition
with integral lighting
coil; maximum
noise suppression
muffler; 85 dB(A) at
operator’s ear Kawasaki, 4-cycle,
3.7 (2.7 kw) air
cooled OHV
engine, 3600
RPM, 7.57 cu
inch (124 cc)
displacement, cast
iron cylinder sleeve;
electronic ignition
with integral lighting
coil; maximum
noise suppression
muffler; 85 dB(A) at
operator’s ear
Fuel capacity
2.64 qt. (2.5
l); regular grade
unleaded gasoline 2.64 qt. (2.5
l); regular grade
unleaded gasoline
Ground speed Mowing speed: 1.3
to 3.3 MPH (2.1 to
5.3 km/h)Transport
speed: 4.9
MPH (7.9 km/h)
maximum Mowing speed: 1.3
to 3.3 MPH (2.1 to
5.3 km/h)Transport
speed: 4.9
MPH (7.9 km/h)
maximum
Width of cut 21 inches (53.3 cm) 18 inches (45.7 cm)
Height of cut 1/16 to 19/64
inches (1.5 to 7.5
mm) with Micro-Cut
bedknife 1/16 to 19/64
inches (1.5 to 7.5
mm) with Micro-Cut
bedknife
Clip frequency 11 blade
(standard): .14
in. 11 blade
(standard): .14
inch
Attachments/Accessories
A selection of Toro approved attachments and
accessories are available for use with the machine to
enhance and expand its capabilities. Contact your
Authorized Service Dealer or Distributor or go to
www.Toro.com for a list of all approved attachments
and accessories.
15