Toro 03662, Руководство по установке

Страница: 1 / 8

Form No. 3386-464 Rev B
Grass Basket Kit
For Reelmaster ® 5010 Series Cutting Units with 5in and 7in Reels
Model No. 03662
Installation Instructions
Installation
Loose Parts
Use the chart below to verify that all parts have been shipped.
Procedure Description Qty. Use
Cylinder collar 4
Bolt 4
Flanged locknut 8
Spacer 2
Stop bracket 2
1
Carriage bolt 4
Install the rear lift cylinder limit kit
(ordered separately).
Basket guide 1
Basket bracket 1
Roll pin 1
Washer 1
Left-hand torsion-spring (gold) 1
Right-hand torsion-spring (black) 1
Basket collar 1
Flat washer (0.344 x 0.875) 2
Bolt (5/16 x 1–1/4 inch) 1
Bolt (5/16 x 1/2 inch) 1
2
Plastic washer 1
Install the basket guides and brackets.
Cut-off bar 1
Bolt (1/4 x 1–3/4 inches) 4
3
Locknut (1/4 inch) 4
Install the cut-off bar.
4
No parts required
–
Remove the 4 grass deflectors.
5
Flanged locknut 2
Remove the support tube (for 5–inch
diameter reels only).
6
Basket assembly 1
Mount the basket assembly to the
cutting unit.
7
No parts required
–
Adjust the basket position.
Important:
To gain additional clearance for the rear baskets when raising the cutting units, install the Rear Lift
Cylinder Limit Kit.
© 2015—The Toro® Company
8111 Lyndale Avenue South
Bloomington, MN 55420 Register at www.Toro.com. Original Instructions (EN)
Printed in the USA
All Rights Reserved
*3386-464* B