g245179
Figure 10
1.
Sunshade
3.
Washer (5/16 inch)
2.
Flange-head bolt (5/16 x
1-1/4 inches)
4.
Clip nut (side-frame
channel)
3.
Torque the flange-head bolts to 1017 to 1355
N∙cm (90 to 120 in-lb).
7
Connecting the Wire
Harness
No Parts Required
Connecting the Wire Harness to
the Chassis Harness
Groundsmaster 4000 Series or Groundsmaster
5900 Machines
g246394
Figure 11
Groundsmaster 4000 Series Machines
g246397
Figure 12
Groundsmaster 5900 Machines
1.
For Groundsmaster 5900 machines, raise the
hood; refer to the
Operator’s Manual
for your
machine.
2.
If installed, remove the cap from the 2-socket
connector of the machine wire harness (
g246396
Figure 13
Groundsmaster 5900 Machines
1.
2-socket connector
(machine wire harness)
3.
2-pin connector (kit wire
harness)
2.
Cap
3.
Connect the 2-pin connector of the wire harness
of the kit to the 2-socket connector of the
machine wire harness (
or
).
6
Содержание 03248
Страница 8: ......
