Toro 03247, Руководство по установке

Страница: 4 / 8

2. Insert the fan-switch shaft through the hole in
the panel and secure the switch with the jam nut
(
Figure 5 ).
3. Align the D-shaped hole in the knob with the flat
on the inner shaft of the fan-switch shaft (
Figure
5 ).
4. Press the knob onto the switch until knob is fully
seated (
Figure 5 ).
Installing the Fan-Speed Controller
1. Align the fan-speed controller to the flange of
the long fan-mount bracket with the electrical
terminals align toward the back of the machine
(
Figure 6 ).
g244491
Figure 6
1. Front of the machine 3. Long fan-mount bracket
2. Fan-speed controller 4. Thread-forming screw (#8
x 3/8 inch)
2. Secure the fan-speed controller to the flange of
the long fan-mount bracket (
Figure 6 ) with the 2
thread-forming screw (#8 x 3/8 inch).
5
Installing the Wire Harness
and Fuse
Parts needed for this procedure:
1 Wire harness
4 Cable ties
1
Fuse (25 A)
Installing the Wire Harness
1. Align the wire harness of the kit to the switch
panel as shown in
Figure 7 .
g244638
Figure 7
1. Kit-wire harness
2. Connect the socket terminals of the kit wire
harness to the blade terminals of the fan-speed
controller (
Figure 8 ) as shown in the following
table:
Wire Harness—Wire Color
for the Socket Terminals Fan-Speed
Controller—Blade Terminal
Violet 1—Low
Brown 2—Medium
Orange 3—High 1
Optional 4—High 2
Pink 5—Motor
4