Toro 02891, Руководство оператора, Страница: 3 / 16

Safety
WARNING
If you do not follow certain safety procedures,
someone could be seriously injured.
Before working on the machine, ensure the
following:
• The engine is switched off.
• The parking brake is applied.
• There is no pressure in the hydraulic system.
• The cutting units are fully down on the ground.
WARNING
Performing maintenance without eye protection
could result in serious injury.
When carrying out maintenance operations always
wear eye protection.
WARNING
Working on the electrical system in an unsafe
manner could result in serious injury.
Before working on the electrical system of the
machine, always disconnect the battery terminals
(negative terminal first) and ensure that no contact
is made between the terminals and the metal
components of the machine.
General Safety
•
If a fault arises in the air-conditioning system then it must
be inspected and repaired by qualified personnel.
•
Never allow refrigerant to be discharged into the
atmosphere.
•
Never attempt to warm any part of the air-conditioning
system with an open flame.
•
Never allow refrigerant to come into contact with the
skin. Refer to the refrigerant data sheet for guidance.
•
Wear suitable personal protective equipment when
handling refrigerant.
•
Never carry out soldering or welding on or near any
parts of the air-conditioning system as heat can cause
expansion and rupture of the components.
•
Always allow the air-conditioning system to cool down
before working on any part of it.
To ensure optimum performance and continued safety
certification of the machine, use only genuine Toro
replacement parts and accessories. Replacement parts and
accessories made by other manufacturers could be dangerous,
and such use could void the product warranty.
Safety and Instructional
Decals
Safety decals and instructions are easily
visible to the operator and are located near
any area of potential danger. Replace any
decal that is damaged or lost.
978004
1. Cooling/air-conditioning
system 3. High-pressure
fluid—hazard of injection
into the body
2. Read the Operator’s
Manual .
4. Poisonous fumes or toxic
gases—asphyxiation
hazard
3