2
The values shown are based on a nominal voltage of 120V/60Hz. In the case of voltages and frequencies
of different power, values may vary. Refer to the label technical specifications to the nominal values of the
T-21 Dual Action Polisher.
GENERAL WARNINGS
The safety and accident prevention instructions are reported in the “SAFETY INSTRUCTION” booklet
which forms an integral part of these documents. This OPERATING INSTRUCTIONS MANUAL indi-
cates the additional information required specifically for use of the T-21 Dual Action Polisher.
CORRECT USAGE
The T-21 Dual Action Polisher (herefore referred to as T-21 DA) is designed to be used as a polisher.
Read all the warnings, instructions, indications provided on drawings and specifications supplied with
this tool. Failure to comply with all the instructions provided below may cause electrical shocks, fire
and/or serious injuries.
The T-21 DA is not intended to be used for smoothing, metal brushing and cutting operations. The use
of this tool for unintended applications may cause hazards and injuries to people.
The T-21 DA must be used with accessories that have been specifically designed or recommended by
the manufacturer. The fixing of the accessory to the tool does not guarantee a safe operation.
The rated speed of the accessories must be at least equivalent to the maximum speed specified on
the tool. Using the accessories at speeds above the rated maximum, may cause them to break or be
projected into the air.
The external diameter and thickness of the accessories must match the specifications of the tool.
Accessories with incorrect dimensions cannot be adequately protected or controlled.
The configuration of accessories must match the tool. The use of accessories that cannot be per-
fectly fitted on the T-21 DA may result in imbalance, excessive vibrations and the impossibility of
controlling the tool.
SAFETY & OPERATING INSTRUCTION MANUAL
TECHNICAL DATA
TYPE
PROTECTION CLASS
ABSORBED POWER
ELECTRONIC SPEED CONTROL
ROTATION
BACKING PLATE FIXING THREAD
PLATE DIAMETER
BUFFING PAD MAX DIAMETER
PAD TYPE
WEIGHT
T-21 DA POLISHER
II
900W
YES
1700/4200 RPM
M8
150mm
180mm
HOOK & LOOP FACED
2.8Kg
T-21
DUAL ACTION
POLISHER
