Medieval Blasta User Manual V4 0722
1&2 £00005.00
3&4 £00008.00
Press & hold: Mode ► button until the display toggles to the games meter
screen.
Tip!
In any of the meter displays you have the choice of either cash or game
information. You can toggle between the two in any screen by pressing and
holding the Mode► button. The system will continue to display your choice of
cash or games information for all of the meter displays. Your choice is
remembered if the game is switched off.
Press: Mode ►
TOTAL GAMES
0000008
Press: Mode ►
GAMES POSITION
▲
?: £00008.00
▼
Note!
The display might show the meter for any position 1 to 4. The display defaults to
the meter for the position selected the last time this screen was displayed.
The ▲ &▼ arrows will be flashing to indicate that you may select the other
playing positions by use of the Up and Down buttons. When you have finished
press: Mode► to leave this screen.
2.08.17 Prime the Pump
The electronics has a pump prime function. It should only be necessary to prime
the pump if it has been emptied of water. This might be required for frost
protection or if the pump is replaced. After the pump chamber has been filled with
water this function will turn on the pump and open all of the water valves. This
allows convenient and rapid priming of the pump.
With the Game turned on and the pump house open observe the LCD display. To
advance to the prime pump function briefly press and release the Mode ►
button. The display will advance each time the button is pressed. Repeat until
the display shows:
©Tornado International Ltd. 2022
-
23
-
Confidential
