Cloud
Traveler
™
Titel
9
Cloud Traveler
CT300
Manual 1.0
Copyright
The contents of this publication may not be reproduced in any part or as a whole, stored, transcribed in an information retrieval
system, translated into any language, or transmitted in any form or by any means, mechanical, magnetic, electronic, optical,
photocopying, manual, or otherwise, without the prior written permission.
Trademarks
All product, company, brand names are trademarks or registered trademarks of their respective companies.
They are used for identification purpose only. Specifications are subject to be changed without prior notice.
FCC Radiation Norm
This equipment has been tested and found to comply with limits for a Class B digital device pursuant to 47 CFR,
Part 2 and Part 15 of the Federal Communication Commission (FCC) rules.
Operation is subject to the following two conditions:
-This device may not cause harmful interference.
-This device must accept any interference received including interferences that may cause undesired operations.
CE Radiation Norm
This equipment has been tested and found to comply with the limits of the European Council Directive 99/5/EC
on the approximation of the law of the member states relating to EN 300 328 V1.7.1 (2006-10), EN 301 489-1 V1.8.1 (2008-04)
and EN 301 489-17 V1.3.2 (2008-04) and EN 60950.
FCC & CE Compliance Statement
These limits are designed to provide reasonable protection against radio interference in a residential environment.
This equipment can generates, uses and radiate radio frequency energy and, if not installed and used in accordance
with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception, which is found
by turning the equipment ON and OFF, the user is encouraged to try to reduce the interference
by one or more of the following measures:
-Reorientate or relocate the receiving antenna.
-Increase the separation between the equipment and the receiver.
-Connect the equipment into an outlet on a circuit different from that to which the receiver is connected to.
-Consult a dealer or an experienced technician for further assistance.
CAUTION!
The Federal Communication Commission warns the user that changes or modifications to the unit, not expressly approved
by the party responsible for compliance, could void the user’s authority to operate the equipment.
