16
For a longer life of the brushes we suggest to daily
invert their position. Whenever brushes result to be
deformed we suggest to reassemble them in the same
position, in order to avoid that the different inclina-
tion of the bristles causes excessive motor overload or
troublesome vibrations.
Use only brushes supplied with the machine or the
ones indicated in the manual “RECOMMENDED
BRUSHES”. The use of other brushes can compro-
mise the good washing result.
FLOOR CLEANING
CONNECTING THE BATTERY CONNECTOR
AND SWITCHING ON THE MACHINE
Once the battery recharging has been completed:
1. Disconnect the connector (2) of the battery recharg-
er from the battery connector (1).
2. Connect the battery connector (1) to the machine
connector (3).
RECOVERY TANK
Verify that the squeegee hose coupling (1) is correctly
inserted into its seat and that the exhaust hose plug (2)
is closed.
The recovery tank is provided with a cover (3) that
blocks itself thanks to the vacuum created by the suc-
tion motor during use.
DETERGENT SOLUTION TANK
The solution tank is provided with an inspection hole.
This hole allows users to clean the exit area of the
detergent solution.
Be sure that the cap is closed tight.
The capacity of the detergent solution tank is indi-
cated in the technical data.
Open the screw plug placed in the left part of the
machine and fill the detergent solution tank with clean
water at a maximum temperature of 122°F (50°C).
Add the liquid detergent in the percentage and condi-
tions recommended by the manufacturer. To avoid
excessive foam, which could cause problems to the
suction motor, use the minimum percentage of deter-
gent. Screw down the plug to close the tank.
On the rear part of the machine is placed a level hose
that permits to easily see the solution quantity inside
the tank both during the filling of the solution and dur
-
ing the working.
Содержание BDSO 27/28
Страница 3: ...3 NOTES...
