14
A.When the signal lamp (7) is
on, the machine is functioning
in automatic (AUTO) model
and the machine activates and
deactivates all the working
functions in an automatic
mode (see under paragraph
“WORKING IN AUTOMATIC
MODE”).
B.When the signal lamp (2) is
on, the machine is functioning
in manual (MAN) mode and it
is possible to choose if:
I. to carry out the only transfer
of the machine without
activating or deactivating the
working functions.
II. to activate separately only
the controls relative to the
washing function with the
brushes (see under paragraph
“WORKING IN MANUAL
MODE”).
III. to activate separately
only the controls relative
to the drying function with
the squeegee (see under
paragraph “WORKING IN
MANUAL MODE”).
ATTENTION:
In manual mode every
function of the machine has
to be activated or deactivated
manually.
FORWARD AND BACKWARD
MOVEMENT
It is recommended to carry out
always the mere transfer of
the machine in mode (BREAK
WASHING).
To proceed to activate the
movement of the machine:
1.Sit on the guiding place.
2.Turn the key switch (24)
clockwise to switch on the
machine.
3.Check the charge level of the
batteries on the display (1).
4.Pressing the push button
(5) the functioning of BREAK
WASHING is chosen to carry
out the mere transfer of
the machine. In fact, in this
mode the washing functions
of the machine are not
working and only the traction
system functions. When the
signal lamp (4) is on, then
the machine is in BREAK
WASHING mode.
5.Check through the signal
lamp (15) that the parking
brake is not inserted and
eventually release it (see under
paragraph EMERGENCY
PARKING BRAKE”).
6.Positioning the selector (28)
forward, the forward drive is
chosen, while positioning it
back, the rear drive is chosen.
7.Press the accelerator pedal
placed on the right part of the
platform to start the machine.
8.Adjust the movement speed
in forward pressing every time
the push button (21) to choose
the slow one (at the maximum
2.2mph/3,6km/h is reached) or
the fast one (at the maximum
3.8mph/6.1km/h is reached).
The signal lamp (22) indicates
that the fast drive is selected,
while signal lamp (23) indicates
that the slow drive is selected.
9.In backward movement,
when the machine is moving,
an intermittent warning device
is activated.
HORN
The machine is equipped
with a horn which is activated
pressing the push button (1).
WORKING BRAKE
To stop the machine during
normal working situations,
release the accelerator pedal.
The machine has an electronic
brake system. To restart,
press the accelerator pedal.
EMERGENCY PARKING
BRAKE
In case of an emergency press
the pedal of the emergency
and parking brake (1) placed
on the left side.
To insert the parking brake
press the brake pedal (1)
and simultaneously move
downwards the lever (2)
placed on the left side of the
steering column.
