15
The bending is not uniform
Adjust the squeegee inclination rotating counter-
clockwise the wing nut (5) to increase the bend-
ing in the central part, or clockwise to increase
the bending on the extremities.
Height adjustment
Once that the pressure and inclination of the
squeegee has been adjusted, it is necessary to
fix this optimum condition making touch slightly
the wheels onto the floor. Rotate counterclock
-
wise the registers (6) to lower the wheels or
clockwise to raise them. Both wheels must be
adjusted in the same measure.
A label placed near the two registers (6) indicates
rotation sense to increase or reduce the height.
PAD ASSEMBLY
To assemble the pad proceed as follows:
Move the pedal (13) to lift the base.
Position the pad under the base and then lower it
always through the lever (13).
FLOOR CLEANING
CONNECTION OF THE BATTERIES TO THE
MACHINE
Plug in the batteries connector (1) to the machine
connector (2), placed in the rear part of the ma-
chine.
RECOVERY TANK
Check that the cover of the suction filter (1) is
correctly secured, after rotating the levers (2)
and that the suction motor hose is correctly con-
nected.
Verify also that the squeegee hose (4) is correctly
inserted into the seats and that the exhaust hose
plug (5) placed in the front part of the machine, is
closed.
https://harrissupplyind.com - To Order Parts Call 608-268-8080