8
ASSEMBLY OF THE UNIT
MAINTENANCE
STARTING/STOPPING OF MACHINE
OPERATING RULES
1. Remove all components from packaging
2. Attach blower motor(s) to Jumbo cover adap
-
tor rings by turning clockwise and locking into
place. Make sure exhaust nozzles(s) face
outward.
3.
Install external filter support rod(s) by placing
them in access hole(s) located in the Jumbo
cover.
4.
Attach external filter(s) by attaching to filter
support rod(s) and installing inlet collars onto
exhaust nozzle(s). Turn collars(s) clockwise
to lock. Do not twist filter.
5. Install hose adaptor into Jumbo housing.
Lock in place by lining up adaptor indent with
lock screw and tightening lock screw.
6. Place Jumbo cover assembly onto drum. The
weight and suction power of the Jumbo cover
assembly will form a seal onto the drum
1.
Plug blower motor cord into a 20 Amp wall
outlet.
2.
Start by turning ON/OFF switch located on
blower to the ON position.
3. Stop by turning ON/OFF switch located on
blower to the OFF position.
Use 1.5” to 3” hoses and attachments.
1.5”
attachments are not recommended for dual
model
.
Use multiple 20 Amp outlets when using the Dual
Electric Jumbo.
Use to recover water, light weight oils, powders,
grindings, and metal shavings.
Extension cords must be equivalent or heavier
than the input cord(12/3), with a 50’ maximum
extension cord length.
BLOWER MOTOR
Damage to an armature invariably is caused by
permitting carbon brushes to become worn to
less that 1/4” in length. To prevent this from oc-
curring, inspect brushes after the first 200 hours
of operation and frequently thereafter, replacing
when necessary. Failure to do so will nullify fac-
tory warranty.
To inspect brushes
1. Unplug power cord from outlet.
2.
Remove the two screws located on the top
cover.
3.
Pull back U-clip (coil spring) to release carbon
brushes.
4. Remove the two brushes and inspect for
length.
5. Replace if necessary.
Note: No other maintenance of motor should be
attempted during the first year after purchase re
-
fer to warranty). Any other type of service should
be performed by an authorized Tornado service
center.
EXTERNAL FILTER
For maximum operating efficiency and to ensure
longer wear, remove filter(s) and empty by de
-
taching the bottom clamp after every use
ALL OTHER MAINTENANCE
Empty and clean vacuum filter(s) and attach
-
ments after each days use for maximum perfor-
mance
https://harrissupplyind.com - To Order Parts Call 608-268-8080