Included with the Tormek T-7
Tormek Jig Solutions
Additional Accessories
Square Edge Jig
For plane irons and wood chisels. Max
tool width 76 mm (3"), max tool thickness
9 mm (
⅜
"). Safety stops prevent the tool
from slipping off the stone.
Truing Tool
Trues the grindstone exactly round and
fl at. Guided by the Universal Support,
which also guides the jigs. Dual knobs
for smooth feed across the stone.
Stone Grader
The fi ne side grades the stone for a 1000
grit fi nish. The coarse side of the grader
reverses the stone to normal fast grinding.
Activates a glazed stone.
AngleMaster
Sets and measures the edge angle. Adjust-
able to any stone diameter from
∅
250 mm
(10") down to
∅
150 mm (6"). Measures
from 10° to 75°. Magnets keeps it in place.
Honing Compound
For application on the leather honing
wheels. Grain size 3 micron (average).
Removes the burr and polishes the
edge to a mirror fi nish.
Handbook
Explains the basics in sharpening and how
to best work with the Tormek system.
161 pages and 660 line drawings.
Tormek DVD
Brings the Handbook instructions to
life. 24 minute including a 4 minute
introduction to the Tormek way of
sharpening.
Turning Tool Setter
Replicates the geometry on turning
gouges and skews when using the
SVD-185 and SVS-50 jigs. With
built in edge geometries.
Woodturner’ s Instruction Box
Contains TNT DVD fi lm and detailed
Handbook. Shows how to shape,
sharpen and hone all your turning tools.
Profi led Honing Wheels
For the inside honing and polishing of
turning/carving gouges and V-tools.
Set of two discs, one with a 3 mm (
⅛
")
radius and one with a 60º tip.
For narrow tools complement with LA-124
with 2 mm (
�⁄��
") radius and a 45º tip.
Machine Cover
For protecting the machine
from shavings and wood dust.
Short Tool Jig
For straight shanked carving gouges and
V-tools down to 45 mm (1¾") length. Short
wood chisels and tools for power carvers.
Max tool width 32 mm (1¼").
Multi Jig
For turning skew chisels, parting and
beading tools and roughing gouges.
Straight carving gouges up to 50 mm
(2") width.
Tool Rest
For turning scrapers, hollowing tools
and thin parting tools. Also for cabinet
scrapers, screwdrivers and spoke
shave blades.
Axe Jig
For carving and carpenter’s axes.
Max height of axe 170 mm (6½").
Copes with both straight and
curved edges.
Scissors Jig
For scissors of all sizes and shears.
Also suitable for portable electric
hand planer blades.
Knife Jig
For most knives. Width 45 mm (1¾").
Long knives need to be stiff. Min blade
length 60 mm (2
⅜
"). Also for carver’s
draw knives.
Long Knife Jig
Suitable for long and fl exible knives.
The 140 mm (5½") width of the jig
stabilizes a thin blade. Min blade
length 160 mm (6¼").
The Ultimate Solution for Square Edges
When mounting a wood chisel, conventional jigs need manual alignment
and therefore the grinding can become out of square. The Tormek Square
Edge Jig SE-76 automatically aligns the tool using its upper and fl at side,
which ensures a 90° edge.
Always a Perfect Grindstone
A grinding stone should run true and have a fl at surface to give a
good result. The Tormek T-7 therefore comes with a unique Truing
Tool, TT-50 and a Stone Grader, SP-650, so you can keep your
grindstone in perfect condition.
Mounts instantly on the
Universal Support.
Precise setting of cutting
depth with Micro Adjust.
Dual knobs for smooth
feed across the stone.
Unlike conventional
jigs, the upper and
fl at side of the tool
is always parallel to
the Universal Support.
Tormek Square Edge Jig
Conventional Jigs
T-7
Water Cooled Sharpening System
Gouge Jig
For fi ngernail shaped turning gouges
of any geometry. Plus shaft for turning
cutters. Also for bent carving gouges
and V-tools. Max tool width 25 mm (1").
Blackstone Silicon SB-250
Tormek Blackstone delivers
fast steel removal on HSS,
exotic alloys and tools with
large bevel area. It can also
touch up carbide. 220 grit.
Japanese Waterstone SJ-250
This stone provides an extra
fine surface finish on hand
tools where a minimum of
steel removal is needed. Ideal
for carving tools. 4000 grit.
Tormek Special Stones
Design Patents
Sweden 77038
Europe 35092
USA D490,522
Powerful Industrial AC motor
• Minimal RPM loss under load
• Power 200 W (input)
• Maintenance fr
ee
• Continuous duty
Universal Support
• For vertical or horizontal mount.
•
Micr
o adjust with scale for each
0.25 mm (0.01").
AngleMaster
Leather Honing Wheel
Tormek Original Grindstone
Developed to combine effi cient
steel removal, smooth surface
fi
nish and long life. Can be
graded with the SP-650 for
a 1000 grit surface. 220 grit.
Stainless Steel Shaft
with EzyLock
PAT PEND
Easy and instant locking
and unlocking by hand.
Advanced Water Trough
Built-in magnet for swarf
collection and attachable
chute to catch every drip.
Safety Stop
Square Edge Jig
Safety Stop
Drill Bit Sharpening Attachment
Sharpens drill bits to a 4-facet point.
Can be set at any angle between 90°
and 150°. The optimal clearance angle
can be set for each drilling operation.
Drill size 3 –22 mm (
�⁄��
"–
⅞
").
Planer Blade Attachment
For blades of any length. Blades longer
than 270 mm (10½") are relocated in
the blade holder. Min width of blade
13 mm (½").
Moulding Knife Attachment
For all makes and shapes of moulding
knives with 24, 30 or 38 mm distance
between guide hole centres. Max width
of blade 100 mm (4").
Included with the Tormek T-7
Tormek Jig Solutions
Additional Accessories
Square Edge Jig
For plane irons and wood chisels. Max
tool width 76 mm (3"), max tool thickness
9 mm (
⅜
"). Safety stops prevent the tool
from slipping off the stone.
Truing Tool
Trues the grindstone exactly round and
fl at. Guided by the Universal Support,
which also guides the jigs. Dual knobs
for smooth feed across the stone.
Stone Grader
The fi ne side grades the stone for a 1000
grit fi nish. The coarse side of the grader
reverses the stone to normal fast grinding.
Activates a glazed stone.
AngleMaster
Sets and measures the edge angle. Adjust-
able to any stone diameter from
∅
250 mm
(10") down to
∅
150 mm (6"). Measures
from 10° to 75°. Magnets keeps it in place.
Honing Compound
For application on the leather honing
wheels. Grain size 3 micron (average).
Removes the burr and polishes the
edge to a mirror fi nish.
Handbook
Explains the basics in sharpening and how
to best work with the Tormek system.
161 pages and 660 line drawings.
Tormek DVD
Brings the Handbook instructions to
life. 24 minute including a 4 minute
introduction to the Tormek way of
sharpening.
Turning Tool Setter
Replicates the geometry on turning
gouges and skews when using the
SVD-185 and SVS-50 jigs. With
built in edge geometries.
Woodturner’ s Instruction Box
Contains TNT DVD fi lm and detailed
Handbook. Shows how to shape,
sharpen and hone all your turning tools.
Profi led Honing Wheels
For the inside honing and polishing of
turning/carving gouges and V-tools.
Set of two discs, one with a 3 mm (
⅛
")
radius and one with a 60º tip.
For narrow tools complement with LA-124
with 2 mm (
�⁄��
") radius and a 45º tip.
Machine Cover
For protecting the machine
from shavings and wood dust.
Short Tool Jig
For straight shanked carving gouges and
V-tools down to 45 mm (1¾") length. Short
wood chisels and tools for power carvers.
Max tool width 32 mm (1¼").
Multi Jig
For turning skew chisels, parting and
beading tools and roughing gouges.
Straight carving gouges up to 50 mm
(2") width.
Tool Rest
For turning scrapers, hollowing tools
and thin parting tools. Also for cabinet
scrapers, screwdrivers and spoke
shave blades.
Axe Jig
For carving and carpenter’s axes.
Max height of axe 170 mm (6½").
Copes with both straight and
curved edges.
Scissors Jig
For scissors of all sizes and shears.
Also suitable for portable electric
hand planer blades.
Knife Jig
For most knives. Width 45 mm (1¾").
Long knives need to be stiff. Min blade
length 60 mm (2
⅜
"). Also for carver’s
draw knives.
Long Knife Jig
Suitable for long and fl exible knives.
The 140 mm (5½") width of the jig
stabilizes a thin blade. Min blade
length 160 mm (6¼").
The Ultimate Solution for Square Edges
When mounting a wood chisel, conventional jigs need manual alignment
and therefore the grinding can become out of square. The Tormek Square
Edge Jig SE-76 automatically aligns the tool using its upper and fl at side,
which ensures a 90° edge.
Always a Perfect Grindstone
A grinding stone should run true and have a fl at surface to give a
good result. The Tormek T-7 therefore comes with a unique Truing
Tool, TT-50 and a Stone Grader, SP-650, so you can keep your
grindstone in perfect condition.
Mounts instantly on the
Universal Support.
Precise setting of cutting
depth with Micro Adjust.
Dual knobs for smooth
feed across the stone.
Unlike conventional
jigs, the upper and
fl at side of the tool
is always parallel to
the Universal Support.
Tormek Square Edge Jig
Conventional Jigs
T-7
Water Cooled Sharpening System
Gouge Jig
For fi ngernail shaped turning gouges
of any geometry. Plus shaft for turning
cutters. Also for bent carving gouges
and V-tools. Max tool width 25 mm (1").
Blackstone Silicon SB-250
Tormek Blackstone delivers
fast steel removal on HSS,
exotic alloys and tools with
large bevel area. It can also
touch up carbide. 220 grit.
Japanese Waterstone SJ-250
This stone provides an extra
fine surface finish on hand
tools where a minimum of
steel removal is needed. Ideal
for carving tools. 4000 grit.
Tormek Special Stones
Design Patents
Sweden 77038
Europe 35092
USA D490,522
Powerful Industrial AC motor
• Minimal RPM loss under load
• Power 200 W (input)
• Maintenance fr
ee
• Continuous duty
Universal Support
• For vertical or horizontal mount.
•
Micr
o adjust with scale for each
0.25 mm (0.01").
AngleMaster
Leather Honing Wheel
Tormek Original Grindstone
Developed to combine effi cient
steel removal, smooth surface
fi
nish and long life. Can be
graded with the SP-650 for
a 1000 grit surface. 220 grit.
Stainless Steel Shaft
with EzyLock
PAT PEND
Easy and instant locking
and unlocking by hand.
Advanced Water Trough
Built-in magnet for swarf
collection and attachable
chute to catch every drip.
Safety Stop
Square Edge Jig
Safety Stop
Drill Bit Sharpening Attachment
Sharpens drill bits to a 4-facet point.
Can be set at any angle between 90°
and 150°. The optimal clearance angle
can be set for each drilling operation.
Drill size 3 –22 mm (
�⁄��
"–
⅞
").
Planer Blade Attachment
For blades of any length. Blades longer
than 270 mm (10½") are relocated in
the blade holder. Min width of blade
13 mm (½").
Moulding Knife Attachment
For all makes and shapes of moulding
knives with 24, 30 or 38 mm distance
between guide hole centres. Max width
of blade 100 mm (4").
