manualshive.com logo in svg

tormek T-2, Перевод оригинальной инструкции

Поделиться
Скачать
tormek T-2 Скачать руководство пользователя страница 6

8

EN

•  The machine should be operated on a flat, stable surface. Keep work area 

clean.  Cluttered areas and benches invite accidents. Keep work area well lit.

•  All children or visitors should be kept at a safe distance from the work area.
•  Make workshop kid proof with padlocks or master switches.

Grounding Instructions

•  In the event of a malfunction or breakdown, grounding provides a path of least 

resistance for electric current to reduce the risk of electric shock. This tool is 
equipped with an electric cord having an equipment-grounding conductor and a 
grounding plug. The plug must be plugged into a matching outlet that is properly 
installed and grounded in accordance with all local codes and ordinances.

•  Do not modify the plug provided – if it will not fit the outlet,  

have the proper outlet installed by a qualified electrician.

•  Improper connection of the equipment-grounding conductor can result in a 

risk of electric shock. The conductor with insulation having an outer surface 
that is green with or without yellow stripes is the equipment-grounding 
conductor. If repair or replacement of the electric cord or plug is necessary, 
do not connect the equipment-grounding conductor to a live terminal.

•  Check with a qualified electrician or service personnel if the grounding instructions are 

not completely understood, or if in doubt as to whether the tool is properly grounded.

•  Use only 3-wire extension cords that have 3-prong grounding 

plugs and 3-pole receptacles that accept the tool’s plug.

•  Repair or replace damaged or worn cord immediately.
•  This machine is intended for use on a circuit that has an outlet that looks like 

the one illustrated in Sketch A in Figure 82.1. The tool has a grounding plug that 
looks like the plug illustrated in Sketch A in Figure 82.1. A temporary adapter, 
which looks like the adapter illustrated in Sketches Band C, may be used to 
connect this plug to a 2-pole receptacle as shown in Sketch B if a properly 
grounded outlet is not available. The temporary adapter should be used only 
until a properly grounded outlet can be installed by a qualified electrician. The 
green-colored rigid ear, lug, and the like, extending from the adapter must be 
connected to a permanent ground such as a properly grounded outlet box.

Содержание T-2








Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды