INSTALLATION
3. Slowly slide one window through the left top panel's window opening and into the two installed vertical
window retainers. Take care to not scratch the window. When finished, verify that the window rests on the
bottom horizontal window retainer.
Figure 32: Window sliding into the window opening.
4. Push a strip of rubber trim onto the edge of one horizontal window retainer. When finished, use shears or a
knife to cut the excess trim.
5. Attach one horizontal window retainer above the window on the left side panel with two M5 × 0.8 - 10
screws.
Figure 33: Horizontal window retainer attached above the window.
Page 25
©Tormach® 2022
Specifications subject to change without notice.
tormach.com
TD10712: Installation Guide: 770MX Enclosure Kit (0522A)
