Page 1
Tormach Inc.
1071 Uniek Drive, Waunakee, WI 53597
Phone: 608.849.8381 / Fax: 209.885.4534
©Tormach® 2014. All rights reserved.
Specifications subject to change without notice.
TD10244_Lathe_Arm_Install_0216A
Lathe Arm Installation
Product Identification:
15L Slant-PRO Lathe Arm Installation Kit (PN 33318)
Purpose:
This document details installation of the lathe arm assembly on the 15L Slant-PRO Lathe (with or
without the full enclosure installed).
Qty
.
Lathe Arm Installation Kit
1
Square Tube Arm w/ 4-hole Mounting Clevis
1
Round Monitor Post
1
Monitor Mounting Plate
4
8 mm Socket Head Cap Screws w/ Lock and Flat
Washers
4
5 mm Socket Head Cap Screws w/ Lock and Flat
Washers
4
Wood Screws (for optional mounting of E-stop to
table)
10
4 mm Flat Head Screws
4
Wire Tie Mounts
4
Wire Ties
2
E-stop Cable Clips
1
Keyboard Table
NOTE:
If any of these items are missing, contact Tormach
Customer Service at (608) 849-8381 for a replacement.
NOTE:
Some kits contain both a short and a long Square Tube Arm. The operator may use either, but the
longer tube is recommended when the full enclosure is installed. Some parts in this kit may not be used.
Optional Prodcts
PN
USB Bulkhead Port Assembly
31289
17” LCD Monitor
30615
17” Touch Screen Kit
35575
Mini Keyboard
31371
Keyboard Cover
31384
Jog Shuttle
30616
