Page 6
This bottom example shows the bolt when it’s completely fished
through the vehicle. You may find it easier to keep the bolt fisher
attached until you get the tie down receiver in place so that the bolt
doesn’t fall into the vehicle frame.
TORKLIFT’S BOLT FISHING GUIDE
Coiled End of Bolt Fisher
Note: The hardware may vary
as to what is being fished along
with the bolt. In this instance
a 1” X 2” plate washer is being
fished along with the hex bolt.
Different applications may req-
ire fishing through various star
washers and flat washers for
example.
Your guide to understanding the installation of our frame mounted tie downs.
This side of the Bolt Fisher should come
out of a hole where the required hardware
(for example 1” X 2” plate washer) can
pass through
Opposite End of Bolt Fisher
Desired Hole on Vehicle (Place the coiled
end of the bolt fisher through this hole).
