Torklift A7770, Важные инструкции по установке для владельцев-операторов

Страница: 2 / 8

2
A7770, A7771 INVENTORY LIST
1- Propane Lock Bracket
1- Propane Lock Handle
1- Washer SS (A7770 - 1/2" SAE) (A7771 - 3/8" SAE)
1- Pin Lock
1- Theft Deterrent Decal
1- Rubber Lock Spacer
ASSEMBLY
Step 1-
Between the two propane tanks, remove the handle from the threaded rod.
Step 2-
Place the
Propane Lock Bracket
over the threaded rod with the feet pointing
down and facing towards either Propane Tank . It will fit over the Propane Tank Cross
Bar and Propane Tank Cover Bracket as seen in Photo 3.1 and 4.1 .
Step 3-
Place the Washer SS over the threaded rod. Thread the Propane Lock Handle
onto the threaded rod and tighten until the propane bottles are secure. Occasionally the
threaded rod will not be tall enough to fully install the Propane Lock Handle. In most
cases, the threaded rod can be unscrewed from the bottom to allow for extra height.
Rotate the Propane Lock Handle so one of the locking holes lines up with the hole in
the
Propane Lock Bracket
see Photo 3.1