4
Step 3 – Option 1
Place the
Power Armor Battery Box
on top of the mounting surface. Mark
four to six locations in the box where it will screw down, and drill a 3/16”
pilot hole in each. Use the
1/4" x 1” Self-Drilling Screws
and
1/4" SS USS
Flat Washers
to screw the
Power Armor Battery Box
down onto the
surface. See figure 3.1. Place a
7/16” square profile O-ring
around the
head of each screw to protect the battery mat from abrasion.
1/4”-20 x 1” SS Hex Bolts
,
1/4" USS SS Flat Washers
, and
1/4”-20 SS
Nylock Nuts
have been included if you would prefer to use them instead of
the self drill screws. If using the hex bolts, the holes will need to be drilled
to 1/4” instead of 3/16”.
Proceed to step 4.
Figure 3.1
Содержание A7720R
Страница 8: ...7 Figure 3 4 ...
