NOTE: Duration for each season should have
been already established.
Now you are ready to begin setting the schedules.
There are a total of 99 ON/OFF events.
6.1 CHANNEL SELECTION
Press SELCT key to toggle between channel 1
and channel 2. When desired channel flashes,
begin setting hours and minutes.
6.2 SETTING HOURS AND MINUTES
Press HOUR and MIN keys to desired setting.
6.3 SETTING DAYS, HOLIDAY, SEASONS
MO (Monday) is flashing - If Monday is desired,
press SELCT key. If Monday is
not desired, press
DAY key to pass Monday and advance to
Tuesday.
a. Press SELCT key to select the flashing day,
holiday, or season.
b. Press DAY key to pass the flashing day and
advance to other days, holiday, and seasons.
The same schedule will repeat on every holiday date.
Each season can have a different daily schedule.
NOTE: SELCT key can also be used to
delete a day,
holiday, or season
previously selected when the afore-
mentioned is flashing.
When you have desired time, event, steady days
and season, press ENTER. This completes the
first schedule entry.
Now display shows that SCH 02 appears on the display.
10
CH 1
This means unit is ready to accept 2nd schedule
entry.
Use same procedure to set more SCHEDULES for
channel 1.
When you are finished setting schedules for chan-
nel 1, press SELCT key at the next blank sched-
ule screen and CH2 will flash. You can now begin
setting schedules for channel 2.
7.0 TO SET ASTRONOMIC SCHEDULE
Press MODE key until display shows
Press SELCT key to toggle between channel 1
and channel 2.
By default, latitude north 10° will appear on the display.
The latitude of your location can be set in this mode.
Press LAT key to advance to the desired # from
10° to 60° north or 10° to 60° south. Press ENTER.
(Unit can not be used for latitudes greater than 60°).
Now display shows
7.1 SELECTING ASTRO DAYS/SEASON(S)
NOTE: Entering your latitude does not assign the
astronomic function. You must enter DAYS/SEASONS
while in the astro mode in order to enable this function.
11
CH 1
ON
CH 1
MO
CH
