modify,
DEL
to delete. Press
ENTER
to con-
firm.
5. HOLIDAY MODE: Press
ENTER
to advance to
desired holiday. Press
MONTH
and
DATE
to
modify,
DEL
to delete. Press
ENTER.
6. SIGNAL MODE: Press
ENTER
to advance to
desired channel. Press
SIG/SEC
to modify,
DEL
to delete.
7. SCHEDULE MODE: Press
ENTER
to advance
to desired channel. Press
HOUR
,
MIN, EVENT
(SIG1/SIG2)
to modify time settings. P r e s s
SELCT
and
DAY
to modify days, holiday and/or
seasons,
DEL
to delete. Press
ENTER
after
each modification.
8. ASTRO MODE: Press
SELCT
to select desired
channel. Press
LAT
to change latitude. Press
ENTER.
Press
DAY
and
SELCT
to add or
delete days in the sunset mode. Press
ENTER
.
Press
HOUR
and/or
MIN
to change offset time
for sunset. Press
EVENT
to change offset from
+ to –. Press
ENTER
and follow the same pro-
cedure above to modify or review sunrise set-
tings.
9. RUN MODE: Time, day and seconds are dis-
played. If today is a programmed holiday, an H
(Holiday) will be displayed steady. If today falls
within a programmed season that season # will
be displayed.
10.0 OVERRIDE
OVR1
and
OVR2
(override keys) are effective
only in the
run mode.
If a channel is schedule for
ON/OFF (non-signal timer), then the channel will
change the present load status until the next
scheduled event. CH# will flash when the load is
overridden from scheduled event.
NOTE:
If a channel is a signal timer, then the load
will turn on each time the override key is pressed
for the length of SIG1 duration. Ch# will flash
while the load is on. While the signal is in
progress, it can be terminated by using the over-
ride key.
11
NOTE:
1.
If season durations are not set, they will not
appear on the schedule and astronomic mode.
2.
Each season can be set up to 364 days.
3.
Any season can cross the year boundary, i.e., sea-
son can start in the current year and end the next
year.
4.
When any two or more seasons overlap, the high-
er numbered season has priority.
Press
MODE
until display shows:
Press
MONTH
and
DATE
to set the starting peri-
od of season 1 and then press
ENTER.
The dis-
play will show:
Press
MONTH
and
DATE
to set the ending period
of season 1 and then press
ENTER.
Follow the
above procedure to set all other 3 seasons, if
desired. To delete any entry press
DEL
a n d
ENTER.
To advance to next mode, press
MODE.
NOTE:
For any season to be used, the starting
MONTH, DATE
and ending
MONTH, DATE
must
be preset.
5.0
SET INDIVIDUAL HOLIDAY DATES
Press
MODE
until display shows:
6
DTS200B - DZS200BP 3/8/07 9:19 AM Page 15
