Tork DGS100A, Инструкция по эксплуатации

Страница: 10 / 16

8
7.0 REVIEW, MODIFY AND DELETE
Press MODE to advance to any of the following
MODES:
1 . AUTO MODE : In this automatic mode, the unit will
execute the scheduled programs . Time, day, seconds
and load status are displayed . C1is displayed when
Duty Cycle is programmed and operating .
OVERRIDE IN AUTO MODE : The load status of the
channel can be manually changed by pressing the
OVRD key . The unit will stay in this position until the
next scheduled event . A flashing LCD load indication
(ON, OFF) shows the status was changed by the
override not a scheduled event . Press the OVRD key
until ON or OFF stops flashing to return to programmed
setting .
2 . MAN MODE : In this manual mode, the unit will
ignore the schedule programs . Time, day, seconds
and load status are displayed . This can be used as a
VACATION SETTING to keep load off while away . Use
override to set to OFF position .
OVERRIDE IN MAN MODE : The load status of the
channel can be manually changed by pressing the
OVRD key . The unit will stay in this position until
OVRD is pressed again . A flashing LCD load
indication (ON, OFF) shows the status was changed by
the override not a scheduled event .
3 . CLOCK MODE : Press HOUR and MIN to modify
existing settings . Press ENTER to save changes .
4 . DATE MODE : Press MONTH , DATE and YEAR to
modify existing settings . Press ENTER to save
changes . DAY is automatically adjusted .
5 . DSt MODE : Factory default is set at US standard