background image

OWNER / USER RESPONSIBILITY

DO NOT OPERATE OR REPAIR THIS EQUIPMENT WITHOUR READING THIS MANUAL.

To  maintain  the  Service  Jack  and  User  Safety,  the  responsibility  of  the  owner  is  to  read  and  follow  these  instructions.

 

Follow all installation and operation instructions. Inspect the service jack for proper operation and function. Read and follow 

the safety instructions. Keep Instructions readily available for equipment operators. Make certain all equipment operators 

are properly trained, understand how to safely and correctly operate the unit, and are properly trained.  

Allow unit operation only with all parts in place and operating safely. Use only genuine replacement parts. Service and 

 

maintain the unit only with authorized or approved replacement parts negligence will make the jack unsafe for use and void 

the warranty. Carefully inspect the unit on a regular basis and perform all maintenance as required. Store these instructions 

in the handle of your jack. Keep all decals on the unit clean and visible. 

Warning Paragraph 

Precautions and Safety should always be followed when Installing and Operating this lift. Store these instructions in the 

handle of your jack. Keep all decals on the unit clean and visible.  Please be sure to make sure that ALL USERS read this 

manual before use and operation. Please read carefully the entire contents of this manual prior to installation and operation. 

By proceeding you agree that you fully understand and comprehend the full contents of this manual. Failure to operate this 

equipment as directed may cause injury or death. The manufacturer is not responsible for any damages or injury caused by 

improper use or neglect. 

Always use Jack Stands!

DO NOT USE

 wood blocks or any other  non-approved load 

sustaining  devices.  The  manufacturer  only  permits  loads 

to  be  sustained  by  jack  stands  that  meet  current ASME 

 

standards. 

DO NOT USE

 wood blocks or any other non-approved lift

ing device in addition for a means of lifting with the jack and 

or load being raised. Failure to head these warnings may 

cause injury or death

WARNING

Safety Markings

Safety markings shall conform to the ANSI Z535 series of 

standards.

(a)  Study,  understand,  and  follow  all  instructions  before  

operating this device.

(b) Do not exceed rated capacity.

(c) Use only on hard level surface.

(d) Lifting device only. Immediately after lifting, support the 

vehicle with appropriate means.

(e) Do not move or dolly the vehicle while on the jack.

(f) Failure to heed these markings may result in personal 

injury and/or property damage.

Safety Messages

Additional safety messages include the following:

 

vehicle manufacturer.

(b) No alterations shall be made to this product.

Additional Warnings

To avoid crushing and related injuries:

-  Never work on, under or around a load supported only by

 

  hydraulic jack.

-  Always use adequately rated jack stands.

-  Chock each unlifted tire in both directions.

-  Do not use this device to lift, level, lower, support nor move

 

  a  house,  mobile  home,  travel  trailer,  camper  or  any 

 

  building structure.

-  Be  alert  and  sober  when  using  this  product.  Do  not 

 

 

2

Содержание T815016LT









Отзывы: