Shanghai TopXGun Robotics Co.,Ltd.
6th Floor,3rd. Building,Elite City,No. 57, AnDemen Street,Yuhua District,Nanjing,China,210012
TEL:
025-86467760
FAX:
025-52323411
l
GPS/Compass module installation
During installation, the TopXGun mark is printed with its side facing up. The arrow
of the round casing is aligned with the direction of the FCU arrow. It is aligned with
the direction of the aircraft head and is horizontally mounted on the GPS/Compass
module bracket.
It is recommended to use the GPS/Compass module holder that comes with the
package. If using another stand, make sure it is not magnetic.
1, M2 flight controller set includes two GPS / compass module. When
installing, connect two GPS/Compass modules to the two CAN1 ports of
the FCU.
2. This module has a built-in magnetic compass. For magnetically
sensitive devices, be careful to keep away from motors, ESCs, power
batteries, and power cords during installation and use.
l
LIU module installation
Install the LIU module in an easy-to-observe position, such as the rear of the aircraft,
without obstructing the USB port. And use the attached 3M glue to connect it to any
CAN expansion port on the PMU.
2.2 Assistant software installation and debugging
Preparation before installation and commissioning
The M2 flight controller supports PC tuning.
If you use a PC for tuning, you need to meet the following conditions:
l
The PC system is Windows XP/7/8/10
l
PC is connected to the Internet
l
Download and install the latest driver and assistant software
Installation and commissioning steps
The following uses the PC-side assistant software as an example to explain the
parameter setting procedure before test flight. For detailed setting methods, refer to
the description of the assistant software embedded.
For safety reasons, if the aircraft is equipped with a propeller, remove the
propeller before commissioning.
l
Step 1: Give the flight controller power.
l
Step 2: Use the product's own USB cable to connect the flight controller and PC.
