9
setting. Press
,
button to select, press
▲
,
▼
button to adjust the date and
time in grey.
(2) Melody and volume
When indoor monitor is in non-talk mode, press
button to select one of the 16
chord melodies as the sound of the bell. Press
choose to the volume of melody
(adjust level: 1-2).
16 chord melodies are Ding-dong, To Alice, Westminster bell, Butterfly lovers, The
cygnet, Red river valley, My heart will go on, Turkey’s march, Small dance,
Congratulations you, William's prelude, Love romance hudson, Memory, The Little
Mermaid, Green sleeves, Romeo and Juliet.
(3) Talk volume
In the talk mode, press
,
to adjust the talk volume. Adjust level: 0-7.
(4) Brightness
In the talk mode, when indoor monitor has dynamic image from outdoor camera,
press
▲
,
▼
to adjust brightness. Adjust level: 0-7.
B
Operation
(1)
Indoor monitor turn on/off
Turn on
: Turn the power switch to “ON”, working light display red and rings the
melody.
Turn off
: Turn the power switch to “OFF”, working light off
。
Maximum Com-sign is level 6. Maximum battery bar is level 4.
6
7. E-lock installation
E-lock and power of e-lock are not included in this product. User can purchase
them based on specific requirement. Wireless unlock control which is set up on the
e-lock, shares the power with e-lock when it works. This wireless unlock control
provides two unlock modes and 3 durative times. 1 sec, 4 sec, 8 sec are provided
for door control relay to drive e-lock to open the door.
Notes: You should guarantee that the distance between wireless unlock
control and outdoor camera is within 10 meters so that the wireless unlock
control is able to receive unlock command.
E-lock connection
1. Open the unlock control box, and connect wire according to the following figure.
And then select one of three unlocking modes: 1 second, 4 seconds and 8 seconds.
2. Learning method and Remove operation of unlock control, remote control and
wireless video door phone.
(1) Press the ‘learning’ button of unlock control, the learning indicator light will flash,
then press the
button of remote control (If it is for wireless video system,
press the
button of indoor monitor when it is in talking status), At this time
the learning indicator light flash and then go out soon, Which means that it
