TOPTEN GPS
- 14 -
Presetting by SMS for GPRS tracking (
Ensure that your SIM card supports GPRS connection prior to setting)
Set ID for TK310
W******,010,ID
Tracker ID must not over 14 digits.
Set APN
W******,011,APN,APNName,APN
Password
If no APN name and password
required, just insert APN only;
APN defaulted as
‘
CMNET
’
;
APN + APN name + password not over
39 characters.
Set IP Address and Port
W******,012,IP, Port
IP: xxx.xxx.xxx.xxx Port: [1,65534]
Enable
GPRS
Tracking
Function
W******,013,X
X=0, close GPRS (default);
X=1, enable TCP
X=2, enable UDP
Set
Time
Interval
for
Sending GPRS Packet
W******,014,XXXXX
XXXXX should be in five digitals and in
unit of 10 seconds.
XXXXX=00000, to close this function;
XXXXX=00001~65535, time interval for
sending GPRS packet and in unit of 10
seconds.
For more information regarding GPRS settings please refer to <GPRS Communication Protocol>
Output Control
W******,020,P,F
P =1, Out1
=2, Out2
=3, Out3
=4, Out4
=5, Out5
F =0, to close the output
=1, to open the output
Output
Control
(Safe
mode)
This function is achievable
when the speed is below
10km/h
and
GPS
is
available.
W******,120,ABCDE
ABCDE represents Out1, Out2, Out3,
Out4, and Out5 respectively.
If A or B or C or D or E,
=0, to close the output
=1, to open the output
=2, to remain previous status
Set sleep mode
for saving power
W******,021,XX###
XX=00 turn off sleep mode
XX=01 sleep mode
XX=02 deep sleep mode
###
is the ending character
Set power saving mode
when TK310 is inactive
(In power saving mode, GPS
stops working. GSM enters
standby mode and stop
sending out message until it
is activated by an SMS or an
incoming call)
W******,026,XX
XX=00, to turn off this function
XX=01~99, to set this function. It is in
unit of minute.
Example:
If XX=10, TK310 will enter power
saving mode after it is immobile for 10
minutes.
TO
P
TEN