Toptech Rate-Tech DAGGER-II, Руководство по эксплуатации

Страница: 17 / 34

www.toptechone.com
- 14 -
3.2.3. Installation of Cross Arm
Gently deliver the horizontal aluminum guide rail to the horizontal guide pulley
according to the direction shown in the diagram to assure smooth gearing of rack
and engine block. (See Figure 2)
3.2.4. Assembly of Motor-driven Ascend/Descend Device, Distributor and
Solenoid Valve Bank
Install the motor-driven ascend/descend device in the mounting plate and use M6
hexagon socket screw to install and fix it. Install the distributor and solenoid
valve bank at the outlet joint of cross arm. Use open-end wrench to lock the nut
tightly. Install the flame cutting torch rack on the motor-driven ascend/descend
cutting torch support. Use fastening bolt to fix it. Connect the rubber hose
connector to the outlet of regulating valve. Use open-end wrench to lock the nut
tightly. Install the protective cover finally. (See Figure 3)
Cross arm
Main body unit