Topsung Industrial T-228 Скачать руководство пользователя страница 2

Topsung Industrial Co.,Limited  

www.topsung.net 

BATTERY INSTALLATION: 

 
- Remove the belt clip by pulling the tab and sliding it up. 
- Pull the battery door lock tab down to release the battery cover. Insert 3 “AAA” batteries. 
- Put the battery cover back into place. Snap the lock tab and belt clip back into place. 
- To use the radio, you must install 3 “AAA” size batteries. 
 
Figure 1 
Figure 2 
Figure 3 
 
 

WARNING: 

- Do not mix old and new batteries. 
- Do not mix alkaline, standard (carbon-zinc) or rechargeable batteries. 
- Do charge the batteries for at least 10 hours when starting use. 
- Always use alkaline batteries for replacement. 
- Do not put batteries into a fire and do not expose them to high heat as they may explode. 
- To use the radio, you must install 3 “AAA” size batteries. 
 
 

Turning the unit on 

Press and hold the ** button. The unit will beep and the LCD display will display the current 
channel. 
 

Turning the unit off 

Press and hold the ** button. The unit will beep and the LCD display will turn blank. 
 

Adjusting the speaker volume 

- Press the 

 button to increase the speaker volume. 

- Press the 

 button to decrease the speaker volume. 

- The speaker volume level is indicated by the number of bars displayed in the lower left 
corner of the LCD display. 
 
 

RECEIVING COMMUNICATIONS: 

- When the PMR is switched on and not being used for speech or paging, it is always in the 
receiving mode. 
- Pressing the 

TALK

 or Call buttons automatically overrides and turns off the receiving mode. 

NOTE

In order for other people to receive your transmission, they must also be on the same 

channel you are currently using. Refer to the "Changing Channels" section for more 
information.

 

 
 

CHANNEL LOCK: 

- This feature locks the channel so that the channel cannot be changed accidentally. 
- To lock the channel, press the 

 and 

MENU

 buttons for 2 seconds until a beep sound is 

heard. The lock symbol will appear on the display. 
- To unlock the channel, press the 

 and 

MENU

 buttons for 2 seconds until a beep sound is 

heard. The lock symbol will disappear. 

Отзывы: