Page
3
2 Introduction
This CCTV TESTER has been developed for On-Site installation and
maintenance of video security systems. With features for displaying video,
controlling PTZ, generating images, capturing data of RS485/RS232, testing LAN
cables and checking audio output from the microphone. It has an easy and
friendly interface and its portability makes it simple for the technician to install and
maintain CCTV security systems.
2.1 Features
3.5"TFT-LCD ~ 960 × 240 resolution (HxV).
DC12V 1A power output for camera testing.
Audio input for Microphone testing.
Digital multi-meter: Voltage, Current, Impedance, Capacitance,
Continuity and Diode testing can be achieved.
PTZ control: Pan/tilts the P/T unit, zooms in/out of the lens, adjustment
of the focus, aperture and can set and call the preset position
Video display: Automatically adapts and displays the video format of
either NTSC or PAL.
LCD: The Brightness, Contrast, Colour and Saturation can be adjusted.
Video Generation: Using the PAL/NTSC Colour bar video generator.
Data analyst: Can capture and analyze RS485/RC232 controlling data.
Cable testing: It can test LAN cables, measuring the connecting status
and display the sequence of connection and the NO. of the LAN cable.
Multi-interface and Multi-baud rate: Supports RS232, RS485 and RS422
interface, with the baud rate ranging from 300 to 19200bps.
Multi-protocol: Supports in excess of twenty PTZ protocols. PELCO-P,
PELCO-D, SAMSUNG etc.
PTZ address scanning: It can search for the ID of a PTZ camera.
Lithium Ion Polymer Battery (12V / 1050mAh). The battery employs
advanced power control and circuit protection. It is a high power-efficient
and energy saving unit. Can last up to 6 hours for normal use after
charging for 6 hours
.
