User Manual of Personal Tracker PT90
- 22 -
Presetting by SMS for GPRS tracking
Set ID for PT30 by SMS
W******,010,ID
Tracker ID must be less than
14 digits
Set APN by SMS
W******,011,APN,APN
Name, APN Password
APN Name, APN Password If
no password required, just
insert APN
name only;
APN defaulted as ‘CMNET’;
APN name + password not
over 39
characters.
Set IP Address and Port by
SMS
W******,012,IP, Port
IP: xxx.xxx.xxx.xxx
Port: [1,65536]
Enable GPRS Function
W******,013,X
X=0, close GPRS (default);
X=1, enable TCP
X=2, enable UDP
Set Time Interval for
Sending GPRS Packet
W******,014,XXXXX
XXXXX should be in five
digitals and in
unit of 10 seconds.
XXXXX=00000,to disable this
function;
XXXXX=00001~65535, time
interval for sending GPRS
packet and in unit of 10
seconds.
Output Control
W******,020,P,F
P =1, Out1
=2, Out2
=3, Out3
=4, Out4
=5, Out5
F =0, to disable the output
=1, to enable the output
Output Control (Safe
mode)
This function is achievable
when the speed is below
10km/h and GPS is
available.
W******,120,ABCDE
ABCDE
represents
Out1,
Out2, Out3,
Out4, Out5 respectively.
If A or B or C or D or E,
=0, to disable the output
=1, to enable the output
=2, to remain previous status
Set power saving mode
when PT30 is still
(In power saving mode, GPS
stops working. GSM enters
standby
mode
and
stop
W******,026,XX
XX=00,
to
disable
this
function
XX=01~99,
to
set
this
function. It is in
unit of minute.
