Control Elements
4
6
2
5
(7)
(4)
(6)
(3)
(1)
MAX
MIN
POWER:40W
220-240V/50Hz
220-240V/50Hz
OFF
LINE INPUT
LINE INPUT
MAX
AC
STEREO
INPUT
STEREO
INPUT
L
R
MADE IN CHINA
ON
TAP20BT
PAIR
(5)
(2)
(7)
(4)
(6)
(3)
(1)
MAX
MIN
POWER:60W
220-240V/50Hz
220-240V/50Hz
OFF
LINE INPUT
LINE INPUT
MAX
AC
STEREO
INPUT
STEREO
INPUT
L
R
MADE IN CHINA
ON
TAP40BT
PAIR
(5)
(2)
REAR PANEL OVERVIEW
To Set-up 2 Loudspeakers(Stereo)
TAP20BT/40BT
(MASTER/LEFT)
TAP20BT/40BT
(SLAVE/RIGHT)
Bluetooth audio device
STEREO
AUDIO
SIGNAL
STEREO
AUDIO
SIGNAL
RIGHT AUDIO SIGNAL
(1) POWER INPUT
Turns the loudspeaker on/off.Make sure the VOLUME
knob is set to "zero" before turning it on.
(2) PAIR BUTTON
Press and release this pair button to pair the loudspeaker
to your Bluetooth device.
Press and hold this pair button for 3 seconds on each
speaker to "link" them for wireless stereo audio.
(3) BALANCED INPUT
Use a standard 1/4" TRS cable to connect your sound
source to this input.
(4) INPUT VOLUME
Turn this knob to adjust the input volume.
(5) PAIR LED
The Bluetooth BLUE LED will flash when the MASTER
speaker is pairing your Bluetooth device.
(6) LINK LED
The Bluetooth RED LED will flash when the both speakers
are linking. The Bluetooth RED LED will light solid when
successfully linked.
(7) STEREO INPUT
Use a standard stereo RCA cable to connect your sound
source to this inputs.
1.Press and hold the
for 3 seconds on both loudspeakers first.
PAIR BUTTOM
BT RED LEDs will flash and you will hear a tone (beep), wait 10 seconds.
2.Wait for
and
to link.
MASTER
SLAVE
When successfully linked, the tones will stop and BT RED LEDs will light solid on both
speakers.
3.Choose a
loudspeaker.
MASTER
MASTER can be either loudspeaker. Be sure to choose only one. The remaining speaker will
be the SLAVE.
4.Press and release
on the
loudspeaker only.
PAIR BUTTON
MASTER
You should hear a tone (beep) ; the PAIR BLUE LED will flash.
5.Select
on your Bluetooth audio device.
SEIKAKU BT2.1ONS
(iPhone, iPad ,Bluetooth adapter etc.)
You should enter the password "2013", When your device's Bluetooth will pair.
Note: The loudspeaker that is connected to your source device is the "master"; the linked
loudspeaker is the "slave". The source device sends its signal to the master, and the master
relays the signal to the slave.The stereo signal will be splited between the two loudspeakers:
the master loudspeaker will play the left channel; the slave loudspeaker will play the right
channel.
Tip: When using two loudspeakers, we recommend labeling the master loudspeaker so you
can distinguish between the two units in future setups.