Topper TOPAZ TRES, Руководство по монтажу, Страница: 6 / 12

Raising the mainsail
.
First attach the boom to the clew of the mainsail.
At the back of the boom can be found the outhaul line running around a
pulley. There is a torpedo runner towards the clew of the mainsail that is to be
placed into the slot on the top of the boom near the back. Pass the outhaul
line through the eye ln the clew and either take back to the grooves at the end
of the boom and cleat or simply tie to the clew of the sail. Tension the outhaul
using the free end at the “front” of the boom.
Pic 5 – Outhaul setup
Then attach the bottom eye of the mainsail to the front of the boom using the
pin connected to the boom.
The main halyard attaches to the head of the mainsail by passing a loop of
the halyard through the eye at the head of the sail, then looping over the
plastic ball and tensioning.